[Saw Blade Grinding] How to Grind Alloy Saw Blade Grinding Method
这里是标题一h1占位文字
Release time：
2024-10-12
How to Grind Alloy Saw Blade
alloy saw bladeAs an industrial consumable, sawing has been used for a long time, and many problems will occur: for example, the cutter head is blunt, and the cutting is not sharp enough; There are lines and burrs on the surface of the cutting workpiece, and the material loss is large. Sawing sound is noisy and uneven; Sawteeth are not sharp, causing smoke and so on! But many customers do not know that these problems can actually be solved by grinding the saw blade again!
Is your alloy saw blade grinding right?
So how to grind the alloy saw blade? It is not like an ordinary tool, only the blade part in accordance with the correct grinding direction is enough. The alloy saw blade itself is more complicated than the ordinary cutter, which is composed of the saw plate and the cutter head. The problems that arise after the use of alloy saw blades are also different, and targeted grinding is required. Therefore, if you want to grind the alloy saw blade well, you not only need to be equipped with a professional gear grinding machine, but also need skilled and experienced workers to complete it.
Tool alloy saw blade grinding standard
First of all, use the detector to check the damage and degree of the alloy saw blade. The tip of the alloy saw blade is prone to cracking or breakage, or scars and missing corners. The sawing board is easily deformed by high temperature during the sawing process. As long as the damage is not very serious, it can generally be ground. After testing, the alloy saw blade will be cleaned, and the surface of the alloy saw blade will have stickies after use under various complex conditions. The tool will be cleaned with special equipment, and the accurate grinding work can be carried out after the cleaning is completed.
Generally, the back of the alloy saw blade tooth is ground first, and the back of the tooth must be ground and formed to ensure the discharge of chips. Grinding time is too short, can not ensure that the alloy saw blade chip smooth, generally skilled workers can master the grinding time. Then change the teeth, especially if there are obvious scars or missing angles, the serrations need to be replaced one by one. And re-grinding, in order to ensure that the height difference to meet the standard.
Then the flatness of the alloy saw blade will be tested, especially the center part of the alloy saw blade and the side vibration must be re measured. Then the deformation is corrected, and the distortion correction of the alloy saw blade is the key to the high quality grinding of the saw blade.
The alloy saw blade teeth grinding must use a special grinding machine, a high number of diamond grinding wheels. It is a fully automatic imported gear grinding machine from Germany, equipped15The technical personnel with years of grinding experience can ensure the sharpness of the alloy saw blade head by grinding the front and rear angles according to the original angle.
After all the alloy saw blades are ground, the relevant parameters will be tested again to see if they meet the factory standards, and before each grinding saw blade leaves the factory, the aluminum material will be tested and cut, and the goods can only be shipped if the test is qualified. Finally, the cutter head will be protected and the saw body will be sprayed with anti-rust oil.
Related news
E-mail: dfrjchensir@163.com
Add: Dongfang Industrial Park, Houxiang, danbei Town, Danyang City, Jiangsu Province
Fax: +86-511-86328209